簡體中文
English
GB/T 9756-2018 APPROVED
In June 2018, the state standards Committee of the state market supervision and administration bureau issued a notice approving 393 national standards and 7 foreign language versions of national standards, including the national standard GB / T 9756 - 2018 " synthetic resin emulsion interior wall paint".
Gb / T 9756 - 2018 " synthetic resin emulsion interior wall coating" replaces the national standard that began to be implemented in 2009 and will be implemented on January 1, 2019. ANTEX participated in the formulation of the standard as a unit.
The national standard GB / T 9756 - 2018 " synthetic resin emulsion interior wall paint" is under the centralized management of the national technical Committee for paint and pigment standardization ( SAC / TC5 ), which completed approval in December 2017. Compared with the previous version of GB / T 9756 - 2009, the main technical differences in the new version of GB / T 9756 - 2018 are as follows:
1. the project of low temperature film forming of primer and top coat has been added. the index is " film forming at 5 is normal."
2. the washability index of finish paint has been improved. qualified products have been changed from " ≥ 300 times" to " ≥ 350 times", first-class products have been changed from " ≥ 1000 times" to " ≥ 1500 times" and superior products have been changed from " ≥ 5000 times" to " ≥ 8000 times"
3. a control operation step of " maximum pressure bearing on bristles" has been added to the brushing resistance test method, etc.
1. the project of low temperature film forming of primer and top coat has been added. the index is " film forming at 5 is normal."
2. the washability index of finish paint has been improved. qualified products have been changed from " ≥ 300 times" to " ≥ 350 times", first-class products have been changed from " ≥ 1000 times" to " ≥ 1500 times" and superior products have been changed from " ≥ 5000 times" to " ≥ 8000 times"
3. a control operation step of " maximum pressure bearing on bristles" has been added to the brushing resistance test method, etc.
China Factory
Add: Minan Industrial Zone,Nantou,Zhongshan, Guangdong,P.R.China
Tel：+86 760 23132375/23114536
Fax:+86 760 23132305/23114537
Web:http://www.zhschip-id.com
E-mail:admin@antex.com.cn
UK Representative Office
Add:UNIT4,CALEB CLOSE,DUNSTABLE ROAD,LUTON,LU4 8DR U.K
Tel:+44 158 2893387
Fax:+44 158 2597587
Add: Minan Industrial Zone,Nantou,Zhongshan, Guangdong,P.R.China
Tel：+86 760 23132375/23114536
Fax:+86 760 23132305/23114537
Web:http://www.zhschip-id.com
E-mail:admin@antex.com.cn
UK Representative Office
Add:UNIT4,CALEB CLOSE,DUNSTABLE ROAD,LUTON,LU4 8DR U.K
Tel:+44 158 2893387
Fax:+44 158 2597587
